MAKE |
MODEL |
H.P. |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Toro |
TX1000 |
18 |
1,000 lbs. |
$250 |
$750 |
$2,250 |
New Holland |
C227 |
74 |
2,700 lbs. |
$300 |
$900 |
$2,700 |
New Holland |
C232 |
76 |
3,200 lbs. |
$350 |
$1,000 |
$3,000 |
N.H. |
C237 |
74 |
3,700 lbs. |
$375 |
$1,100 |
$3,300 |
New Holland |
C238 |
90 |
3,800 lbs. |
$425 |
$1,250 |
$3,750 |
New Holland |
C238 Hi Flow |
90 |
3,800 lbs. |
$475 |
$1,425 |
$4,275 |
Bobcat |
T870 |
99 |
5,030 lbs. |
$475 |
$1,425 |
$4,275 |
MAKE |
MODEL |
H.P. |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
New Holland |
L220 |
60 |
2,000 lbs. |
$200 |
$600 |
$1,800 |
New Holland |
L223 |
74 |
2,250 lbs. |
$250 |
$750 |
$2,250 |
New Holland |
L228 |
82 |
2,500 lbs. |
$250 |
$750 |
$2,250 |
New Holland |
L230 |
90 |
3,000 lbs. |
$285 |
$850 |
$2,500 |
New Holland |
L230 High Flow |
90 |
3,000 lbs. |
$350 |
$1,000 |
$3,000 |
DESCRIPTION |
DAY |
WEEK |
4 WEEK |
|
Hydraulic Auger w/1 bit |
$125 |
$300 |
$900 |
Extra Bit |
$50 |
$150 |
$450 |
Auger Extensions |
$15 |
$45 |
$135 |
Hydraulic Concrete Breaker |
$195 |
$585 |
$1,750 |
Pallet Forks |
$35 |
$100 |
$300 |
Blue Diamond Grapple Forks 60" |
$85 |
$250 |
$750 |
AMI Mat Grapple Forks 72" |
$125 |
$350 |
$1,050 |
Trencher |
$150 |
$450 |
$1,350 |
Grapple Bucket 83" |
$125 |
$350 |
$1,050 |
Rock Bucket 84" |
$100 |
$300 |
$900 |
Harley Box Rake 84" |
$150 |
$450 |
$1,350 |
FFC Auto Rake 76" |
$200 |
$585 |
$1,750 |
Pick Up Broom* |
$150 |
$450 |
$1,350 |
Angle Push Broom* |
$150 |
$450 |
$1,350 |
Brush Cutter 72"* |
$200 |
$585 |
$1,750 |
Rezloh Edge |
$50 |
$100 |
$250 |
Hard Rubber Tires** |
$75 |
$225 |
$675 |
LaBounty MSD7R Shear*** |
|
$1,250 |
$3,750 |
Burchland Silt Fencer 72" |
$175 |
$575 |
$1,575 |
Trench Grader-18" Vibratory Trench Compactor |
$175 |
$575 |
$1,575 |
Fecon BH7455 Mulcher**** |
$400 |
$1,200 |
$3,600 |
FFC Cold Planer 30" High Flow |
$400 |
$1,200 |
$3,600 |
'8 Snow Push Box |
|
|
$695 |
*Bristle wear charged at $125 per inch.
*Customer responsible for damaged blades.
**Installation and damage charges additional.
***10% blade wear surcharge or actual blade wear cost will be added to rate, whichever is greater.
****Customer responsible for broken/missing teeth.
MAKE |
MODEL |
H.P. |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Caterpillar |
420F |
100 |
1.4 yd. Loader, 17' 9" Dig Depth |
$275 |
$850 |
$2,500 |
Caterpillar |
420EIT |
101 |
1.3 yd. Loader, 17' 9" Dig Depth |
$325 |
$1,000 |
$2,950 |
Caterpillar |
430EIT |
97 |
1.5 yd. Loader, 19' 6" Dig Depth |
$375 |
$1,125 |
$3,375 |
Catepillar |
430F |
117 |
w/Hydraulic Thumb |
$375 |
$1,125 |
$3,375 |
*Bristol wear charged at $125 per inch.
**Customer is responsible for all jumper line damage & repair.
**Customer is responsible for isolator replacement.
***Customer is responsible for greasing hammer at recommended intervals.
***Customer is responsible for all hydraulic hose damage and repair.
***Customer is responsible for all tool repair and damage.
MAKE |
MODEL |
H.P. |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Caterpillar |
953D |
148 |
2.42 yds. |
$725 |
$2,175 |
$6,500 |
Caterpillar |
963K** |
194 |
3.2 yds. |
$950 |
$2,850 |
$8,500 |
Caterpillar |
973D** |
263 |
4.2 yds. |
$1,250 |
$3,750 |
$11,250 |
*Quick coupler unit available w/forks.
**Ripper units available.
ATTACHMENT |
DESCRIPTION |
DAY |
WEEK |
4 WEEK |
|
Quick Attach Forks |
Cat 963K |
$125 |
$350 |
$1,000 |
Rear Ripper |
Cat 963K |
$175 |
$525 |
$1,575 |
MAKE |
MODEL |
H.P. |
CAPACITY |
SPECS |
DAY |
WEEK |
4 WEEK |
|
New Holland |
W-80B TC |
82 |
1.44 yds. |
* QC |
$350 |
$1,050 |
$3,150 |
Kawasaki |
65ZV-2 |
154 |
2.5 yds. |
* QC |
$465 |
$1,395 |
$4,150 |
Kawasaki |
70Z7 |
173 |
3.4 yds. |
* QC |
$550 |
$1,650 |
$4,950 |
Kawasaki |
80Z7 |
200 |
4.2 yds. |
* QC |
$675 |
$2,000 |
$6,000 |
Caterpillar |
IT-62H |
230 |
4.25 yds. |
* QC |
$800 |
$2,400 |
$7,200 |
Kawasaki |
85Z7 |
249 |
4.5 yds. |
* QC |
$800 |
$2,400 |
$7,200 |
Kawasaki |
90Z7 |
295 |
5.0 yds. |
* QC |
$1,000 |
$3,000 |
$9,000 |
Kawasaki |
92Z7 |
286 |
6.8 yds. |
* QC |
$1,175 |
$3,500 |
$10,000 |
Catpillar |
972M |
298 |
6.25 yds. |
* QC |
$1,225 |
$3,675 |
$11,000 |
Kawasaki |
95Z7 |
389 |
8.1 yds. |
* QC |
$1,350 |
$4,000 |
$12,000 |
Kawasaki |
95Z7 XTreme |
389 |
9.8 yds. |
* QC |
$1,500 |
$4,500 |
$13,500 |
Kawasaki |
115ZV-2 |
532 |
8.5 yds. |
|
|
$5,500 |
$16,500 |
*Hydraulic quick coupler (QC) machines available.
DESCRIPTION |
DAY |
WEEK |
4 WEEK |
|
Forks 65Z/70Z |
$95 |
$250 |
$750 |
Forks 80Z/85Z/90Z/95Z |
$125 |
$350 |
$1,000 |
Pipe Clamp Forks 80Z7/85Z7 |
$350 |
$1,000 |
$3,000 |
Grapple Forks 65Z/70Z |
$225 |
$675 |
$2,000 |
Grapple Forks 90Z/95Z |
$625 |
$1,850 |
$5,500 |
Angle Broom 65ZV2/70ZV7 |
$250 |
$750 |
$2,000 |
Angle Broom IT62-H* |
$250 |
$750 |
$2,000 |
Jib Boom 65ZV2/70Z7 |
$50 |
$150 |
$450 |
Jib Broom 80Z7/85Z7 |
$75 |
$225 |
$675 |
Jib Boom 90Z7/95Z7 |
$125 |
$350 |
$1,000 |
14' Snow Push Box |
|
|
$1,150 |
*Bristle wear charged at $125 per inch.
MAKE |
MODEL |
H.P. |
WEIGHT |
DAY |
WEEK |
4 WEEK |
|
Mauldin |
MG622 |
133 |
23,000 lbs. |
$600 |
$1,800 |
$5,400 |
Caterpillar |
12M |
158 |
33,000 lbs. |
$850 |
$2,500 |
$7,500 |
Caterpillar |
140H |
185 |
32,500 lbs. |
$850 |
$2,500 |
$7,500 |
Caterpillar |
140M |
185 |
35,700 lbs. |
$950 |
$2,850 |
$8,500 |
Caterpillar |
14H* |
229 |
44,500 lbs. |
$1,285 |
$3,850 |
$11,500 |
*With push block and rear ripper.
MAKE |
MODEL |
H.P. |
WEIGHT |
DAY |
WEEK |
4 WEEK |
|
Caterpillar |
D3K XL/LGP |
81 |
17,800 lbs. |
$375 |
$1,125 |
$3,375 |
Caterpillar |
D4K XL/LGP* |
92 |
18,700 lbs. |
$425 |
$1,250 |
$3,750 |
Caterpillar |
D5K XL/LGP* |
100 |
21,300 lbs. |
$500 |
$1,500 |
$4,500 |
Caterpillar |
D6K XL* |
125 |
28,400 lbs. |
$585 |
$1,750 |
$5,250 |
Caterpillar |
D6K LGP* |
125 |
29,700 lbs. |
$650 |
$1,925 |
$5,750 |
Caterpillar |
D6N XL |
145 |
36,000 lbs. |
$750 |
$2,250 |
$6,750 |
Caterpillar |
D6N LGP |
145 |
40,000 lbs. |
$825 |
$2,475 |
$7,400 |
Caterpillar |
D6T XL |
228 |
44,000 lbs. |
$950 |
$2,850 |
$8,500 |
Caterpillar |
D6T XW** |
228 |
46,000 lbs. |
$1,000 |
$3,000 |
$9,000 |
Caterpillar |
D6T XW PAT** |
228 |
46,000 lbs. |
$1,000 |
$3,000 |
$9,000 |
Caterpillar |
D6T LGP** |
228 |
48,300 lbs. |
$1,100 |
$3,175 |
$9,500 |
Caterpillar |
D6T LGP PAT** |
228 |
48,300 lbs. |
$1,100 |
$3,175 |
$9,500 |
Caterpillar |
D8T** |
347 |
85,000 lbs. |
|
$5,175 |
$15,500 |
Caterpillar |
D10R |
570 |
146,000 lbs. |
|
|
$27,500 |
*Accugrade and Top Con ready machines available.
**Ripper machines available.
SPECS |
DAY |
WEEK |
4 WEEK |
|
Fits Caterpillar D6T |
$175 |
$525 |
$1,575 |
Fits Caterpillar D8T |
$225 |
$675 |
$2,000 |
MAKE |
MODEL |
H.P. |
SPECS |
DAY |
WEEK |
4 WEEK |
|
Caterpillar |
D5K/XL/LGP |
100 |
Winch Unit |
$925 |
$2,300 |
$6,900 |
Caterpillar |
D6K/XL/LGP |
125 |
Winch Unit |
$1,100 |
$2,750 |
$8,250 |
Caterpillar |
D6N/XL/LGP |
145 |
Winch Unit |
$1,325 |
$3,300 |
$9,900 |
Caterpillar |
D6T XL* |
228 |
Winch Unit |
$1,550 |
$3,850 |
$11,500 |
Caterpillar |
D6T XW* |
228 |
Winch Unit |
$1,600 |
$4,000 |
$12,000 |
Caterpillar |
D6T LGP* |
228 |
Winch Unit |
$1,675 |
$4,175 |
$12,500 |
Caterpillar |
D8T* |
347 |
Winch Unit |
$2,350 |
$5,850 |
$17,500 |
*Units subject to $195 cable inspection upon return.
*Angle blades available.
*3D modeling available at additional charge.
*Set-up charge applies.
MAKE |
MODEL |
H.P. |
WEIGHT |
CAPACITY |
DESCRIPTION |
DAY |
WEEK |
4 WEEK |
|
Caterpillar |
D5K LGP |
99 |
21,300 lbs. |
20,000 lbs. |
Midwestern Side Boom M520C |
$675 |
$2,000 |
$6,000 |
Caterpillar |
D6K LGP |
125 |
39,000 lbs. |
40,000 lbs. |
Midwestern Side Boom M540C |
$890 |
$2,675 |
$8,000 |
Caterpillar |
PL61 |
125 |
37,500 lbs. |
40,000 lbs. |
Caterpillar Side Boom |
$890 |
$2,675 |
$8,000 |
*Units subject to $195 cable inspection upon return.
*Customer responsible for any and all cable damage.
*On-site assembly charges may apply.
MAKE |
MODEL |
H.P. |
WEIGHT |
DAY |
WEEK |
4 WEEK |
|
Kobelco |
SK85CS |
56 |
17,600 lbs. |
$425 |
$1,250 |
$3,750 |
Kobelco |
SK140SR LC* |
94 |
32,040 lbs. |
$500 |
$1,500 |
$4,500 |
Kobelco |
SK140SR LC* w/Rubber Track Pads |
94 |
32,040 lbs. |
$635 |
$1,900 |
$5,350 |
Kobelco |
SK140SR LC* w/Offset Boom |
94 |
32,040 lbs. |
$575 |
$1,675 |
$5,000 |
Kobelco |
ED160SRLC-5 w/Blade Runner |
96 |
36,200 lbs. |
$675 |
$2,000 |
$6,000 |
Kobelco |
SK170 LC |
127 |
38,800 lbs. |
$575 |
$1,675 |
$5,000 |
Kobelco |
SK210 LC |
166 |
48,500 lbs. |
$675 |
$2,000 |
$6,000 |
Kobelco |
SK230SR LC |
157 |
55,500 lbs. |
$785 |
$2,350 |
$7,000 |
Kobelco |
SK235SR LC |
153 |
57,500 lbs. |
$800 |
$2,425 |
$7,250 |
Kobelco |
SK260 LC |
178 |
56,890 lbs. |
$850 |
$2,500 |
$7,500 |
Kobelco |
SK270SR |
160 |
60,000 lbs. |
$850 |
$2,500 |
$7,500 |
Kobelco |
SK300 LC |
252 |
68,100 lbs. |
$950 |
$2,850 |
$8,500 |
Caterpillar |
328D LCR |
204 |
73,500 lbs. |
$1,075 |
$3,175 |
$9,500 |
Kobelco |
SK350 LC |
270 |
83,300 lbs. |
$1,075 |
$3,175 |
$9,500 |
Kobelco |
SK500 LC |
369 |
114,000 lbs. |
$1,500 |
$4,500 |
$13,500 |
Kobelco |
SK850 LC |
500 |
177,000 lbs. |
|
|
$25,000 |
*Push blade units available.
MAKE |
MODEL |
H.P. |
WEIGHT |
DAY |
WEEK |
4 WEEK |
|
Caterpillar |
M322D* |
173 |
47,400 lbs. |
$1,075 |
$3,200 |
$9,500 |
*Twist-O-Wrist bucket available.
*Hydraulic hammer available.
MAKE |
MODEL |
H.P. |
WEIGHT |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Kobelco |
SK17SR |
15 |
3,650 lbs. |
7'1" Dig Depth |
$200 |
$600 |
$1,800 |
Kobelco |
SK35SR |
28 |
7,960 lbs. |
10'1" Dig Depth |
$250 |
$750 |
$2,250 |
Kobelco |
SK45SR |
39 |
10,300 lbs. |
11'3" Dig Depth |
$275 |
$825 |
$2,475 |
Kobelco |
SK55SRX |
39 |
12,295 lbs. |
12'10" Dig Depth |
$300 |
$900 |
$2,700 |
MAKE |
MODEL |
H.P. |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Kobelco |
SK210 LC |
157 |
50 ft. Reach |
$1,075 |
$3,175 |
$9,500 |
Kobelco |
SK260 LR |
178 |
60 ft. Reach |
$1,175 |
$3,500 |
$10,500 |
Kobelco |
SK295 LC |
204 |
63 ft. Reach |
$1,400 |
$4,175 |
$12,500 |
*Units subject to bucket pin & bushing inspection upon return.
*Customer responsible for excessive bucket pin & bushing wear.
*Additional fee to weld plate over teeth.
*Additional fee to weld plate over teeth.
*Pipe shoe(s) not included.
MAKE |
MODEL |
H.P. |
WEIGHT |
ATTACHMENT |
DAY |
WEEK |
4 WEEK |
|
Kobelco |
SK55SRX |
39 |
12,295 lbs. |
Hydraulic Thumb |
$375 |
$1,075 |
$3,250 |
Kobelco |
SK85CS |
56 |
18,700 lbs. |
Hydraulic Thumb |
$450 |
$1,350 |
$4,050 |
Kobelco |
SK140SR LC |
94 |
32,100 lbs. |
Hydraulic Thumb/Grapple |
$635 |
$1,900 |
$5,350 |
Kobelco |
SK170 LC |
127 |
38,800 lbs. |
Hydraulic Thumb/Grapple |
$750 |
$2,175 |
$6,500 |
Kobelco |
SK210 LC |
166 |
48,500 lbs. |
Hydraulic Thumb/Grapple |
$850 |
$2,500 |
$7,500 |
Kobelco |
SK235SR LC |
153 |
57,500 lbs. |
Hydraulic Thumb/Grapple |
$975 |
$2,925 |
$8,750 |
Kobelco |
SK260 LC |
178 |
56,890 lbs. |
Hydraulic Thumb/Grapple |
$1,050 |
$3,125 |
$9,375 |
Kobelco |
270SR |
160 |
60,000 lbs. |
Hdraulic Thumb/Grapple |
$1,050 |
$3,125 |
$9,375 |
Kobelco |
SK300 LC |
252 |
68,000 |
Hydraulic Thumb/Grapple |
$1,200 |
$3,600 |
$10,500 |
Kobelco |
SK350 LC |
270 |
83,300 lbs. |
Hydraulic Thumb/Grapple |
$1,300 |
$3,850 |
$11,500 |
Kobelco |
SK500 LC |
369 |
114,000 |
Hydraulic Thumb/Grapple |
|
|
$16,500 |
*Customer is responsible for all damage and excessive wear to thumbs/grapples.
MAKE |
MODEL |
H.P. |
ATTACHMENT |
WEEK |
4 WEEK |
|
Kobelco |
SK210 LC |
150 |
AMI GR3345 |
$3,250 |
$9,500 |
Kobelco |
SK270SR LC |
160 |
AMI GR3345 |
$3,675 |
$11,000 |
*Customer is responsible for all damage, excessive wear & jumper line damage.
MAKE |
MODEL |
H.P. |
WEIGHT |
ATTACHMENT |
WEEK |
4 WEEK |
|
Kobelco |
SK350 LC |
254 |
79,600 lbs. |
Geith GT80 |
$4,500 |
$13,500 |
*Price does not include blade wear or tooth wear.
MAKE |
MODEL |
H.P. |
WEEK |
4 WEEK |
|
Kobelco |
SK210 LC |
150 |
$3,500 |
$11,000 |
*Customer is responsible for all damage, excessive wear & jumper line damage.
MAKE |
MODEL |
H.P. |
WEIGHT |
ATTACHMENT |
WEEK |
4 WEEK |
|
Kobelco |
SK210 LC |
166 |
48,500 lbs. |
LaBounty MSD1500R |
$7,000 |
$14,000 |
Kobelco |
SK350 LC |
270 |
83,300 lbs. |
LaBounty MSD2500R |
$10,750 |
$21,500 |
Kobelco |
SK500 LC |
345 |
111,400 lbs. |
LaBounty MSD3000R |
$12,000 |
$24,000 |
*Customer is responsible for all jumper line damage and repair.
*Price does not include blade wear, tooth wear and maintenance.
*10% blade wear surcharge or actual blade wear cost will be added to rate, whichever is greater.
MAKE |
MODEL |
H.P. |
WEIGHT |
ATTACHMENT |
WEEK |
4 WEEK |
|
Kobelco |
SK85CS |
56 |
18,700 lbs. |
LaBounty MSD7R |
$2,300 |
$6,850 |
*Customer is responsible for all jumper line damage and repair.
*Price does not include blade wear, tooth wear and maintenance.
*10% blade wear surcharge or actual blade wear cost will be added to rate, whichever is greater.
MAKE |
MODEL |
H.P. |
WEIGHT |
ATTACHMENT |
DAY |
WEEK |
4 WEEK |
|
Kobelco |
SK85CS |
56 |
18,700 lbs. |
Blue Diamond 50" |
$650 |
$1,925 |
$5,750 |
*Customer is responsible for all jumper line damage and repair.
*Price does not include blade wear, tooth wear and maintenance.
*10% blade wear surcharge or actual blade wear cost will be added to rate, whichever is greater.
MAKE |
MODEL |
H.P. |
WEIGHT |
ATTACHMENT |
DAY |
WEEK |
4 WEEK |
|
Kobelco |
SK85CS |
56 |
18,700 lbs. |
McMillen Auger Drive |
$550 |
$1,550 |
$4,650 |
Kobelco |
SK170SR |
127 |
38,800 lbs. |
McMillen Auger Drive |
$750 |
$2,175 |
$6,500 |
MAKE |
MODEL |
H.P. |
WEIGHT |
ATTACHMENT |
DAY |
WEEK |
4 WEEK |
|
Kobelco |
SK55SRX |
39 |
12,295 lbs. |
Rammer 777 |
$495 |
$1,485 |
$4,450 |
Kobelco |
SK85CS |
56 |
18,700 lbs. |
Rammer 999 |
$625 |
$1,875 |
$5,675 |
Kobelco |
SK140SR LC |
94 |
32,100 lbs. |
Rammer 1655 |
$925 |
$2,750 |
$8,250 |
Kobelco |
SK170 LC |
127 |
38,800 lbs. |
Rammer 1655 |
$975 |
$2,925 |
$8,750 |
Kobelco |
SK210 LC |
166 |
48,500 lbs. |
Rammer 2166 |
$1,275 |
$3,825 |
$11,450 |
Kobelco |
SK230SR LC |
157 |
55,500 lbs. |
Rammer 2166 |
$1,385 |
$4,150 |
$12,450 |
Kobelco |
SK235SR LC |
153 |
57,500 lbs. |
Rammer 2166 |
$1,400 |
$4,225 |
$12,700 |
Kobelco |
SK270SR LC |
160 |
60,000 lbs. |
Rammer 2166 |
$1,400 |
$4,225 |
$12,700 |
Kobelco |
SK260 LC |
178 |
56,890 lbs. |
Rammer 2577 |
$1,600 |
$4,725 |
$14,250 |
Kobelco |
SK300 LC |
252 |
68,100 lbs. |
Rammer 3288 |
|
$5,850 |
$17,500 |
Kobelco |
SK350 LC |
270 |
83,300 lbs. |
Rammer 3288 |
|
$6,175 |
$18,500 |
Kobelco |
SK500 LC |
345 |
114,400 lbs. |
Rammer 4099 |
|
$8,150 |
$24,500 |
*Add $1,000/mo. for underwater kit.
*Customer is responsible for greasing hammer at recommended intervals.
*Customer is responsible for all hydraulic hose damage and repair.
*Customer is responsible for all tool repair and damage.
MAKE |
MODEL |
H.P. |
WEIGHT |
ATTACHMENT |
DAY |
WEEK |
4 WEEK |
|
Kobelco |
SK55SRX |
39 |
12,295 lbs. |
Allied Ho-Pac 500B |
$400 |
$1,200 |
$3,600 |
Kobelco |
SK85CS |
56 |
18,700 lbs. |
Allied Ho-Pac 1000B |
$525 |
$1,575 |
$4,775 |
Kobelco |
SK140SR LC |
94 |
32,100 lbs. |
Allied Ho-Pac 1600VMS |
$675 |
$2,085 |
$6,250 |
Kobelco |
SK170 LC |
127 |
38,800 lbs. |
Allied Ho-Pac 1600VMS |
$800 |
$2,425 |
$7,250 |
Kobelco |
SK210 LC |
166 |
48,500 lbs. |
Allied Ho-Pac 2300VMS |
$900 |
$2,750 |
$8,250 |
Kobelco |
SK230SR LC |
157 |
55,500 lbs. |
Allied Ho-Pac 2300VMS |
$1,025 |
$3,100 |
$9,250 |
Kobelco |
SK235SR LC |
153 |
57,500 lbs. |
Allied Ho-Pac 2300VMS |
$1,025 |
$3,175 |
$9,500 |
Kobelco |
SK260 LC |
178 |
56,890 lbs. |
Allied Ho-Pac 2300VMS |
$1,075 |
$3,250 |
$9,750 |
Kobelco |
SK270 |
160 |
60,000 lbs. |
Allied Ho-Pac 2300VMS |
$1,075 |
$3,250 |
$9,750 |
Kobelco |
SK300 LC |
197 |
68,000 lbs. |
Allied Ho-Pac 4000VMS |
|
$3,700 |
$11,000 |
Kobelco |
SK350 LC |
270 |
83,800 lbs. |
Allied Ho-Pac 4000VMS |
|
$4,025 |
$12,000 |
*Customer is responsible for all jumper line damage and repair.
*Customer is responsible for isolator replacement.
*Tire chains available for an additional $1,000/4-weeks
MAKE |
MODEL |
H.P. |
SPECS |
DAY |
WEEK |
4 WEEK |
|
New Holland |
8N |
50 |
Wheeled Unit |
$225 |
$675 |
$2,025 |
Kubota |
M135GXD |
135 |
Wheeled Unit with Loader |
$500 |
$1,500 |
$4,500 |
Challenger |
MT755D |
327 |
Rubber Track |
$850 |
$2,500 |
$7,500 |
Case |
315 |
315 |
Wheeled Unit |
$850 |
$2,500 |
$7,500 |
Case |
340 |
340 |
Wheeled Unit |
$850 |
$2,500 |
$7,500 |
Case |
500 |
500 |
Wheeled Unit |
|
$3,500 |
$10,500 |
MAKE |
MODEL |
SPECS |
DAY |
WEEK |
4 WEEK |
|
Broadcast |
|
3-Point |
$95 |
$295 |
$595 |
Brillion |
LSS6 |
6' 3-Point |
$225 |
$600 |
$1,800 |
Woods |
PSS84 |
7' 3-Point |
$225 |
$600 |
$1,800 |
MAKE |
MODEL |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Woods |
BB60XC |
3 pt. Mower |
$200 |
$595 |
$1,175 |
Woods |
BW1800 |
15' Batwing Mower |
$345 |
$995 |
$1,995 |
*Customer responsible for blade damage.
MAKE |
MODEL |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Youngs Welding |
4048 Roller |
2-48" Padfoot Drums, 40" dia. Tow Behind |
$200 |
$600 |
$1,800 |
MAKE |
MODEL |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Woods |
DMH6N |
6' wide, 3 pt. mount |
$155 |
$465 |
$930 |
Rome |
OT-10 |
10' wide, 24" Blades |
$275 |
$800 |
$2,400 |
Rome |
TAW20S |
9', 6" wide, 32" Blades |
$350 |
$1,100 |
$3,300 |
Rome |
TACW-16 |
11' wide, 32" Blades |
$400 |
$1,200 |
$3,600 |
Rome |
TRCW-16 |
12'6" wide, 42" Blades |
$600 |
$1,800 |
$5,400 |
John Deere |
630 |
26' wide, 22" Blades |
$400 |
$1,200 |
$3,600 |
MAKE |
MODEL |
H.P. |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Toro |
TRX26 |
26 |
Walk Behind, 4 ft. Depth |
$150 |
$450 |
$1,350 |
Vermeer |
RT200 |
23 |
Walk Behind, 4' Depth |
$150 |
$450 |
$1,350 |
Vermeer |
RT450 |
42 |
Ride-On, 5' 6" Depth |
$450 |
$1,350 |
$4,000 |
Toro |
RT600 |
65 |
Ride-On, 6' Depth |
$500 |
$1,500 |
$4,500 |
Ditch Witch |
RT55 |
60 |
Ride-On, 62" Depth |
$500 |
$1,500 |
$4,500 |
MAKE |
MODEL |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Volvo |
DD15 |
36" Double Drum Ride-On |
$175 |
$525 |
$1,500 |
Caterpillar |
CB24B |
47" Double Drum Ride-On |
$275 |
$825 |
$2,475 |
Volvo |
DD112HF |
78" Double Drum Ride-On |
$695 |
$2,085 |
$6,250 |
MAKE |
MODEL |
SPECS |
DAY |
WEEK |
4 WEEK |
|
Volvo |
SD45D |
54" Drum, Canopy |
$325 |
$925 |
$2,775 |
Volvo |
SD70/75 |
66" Drum, Canopy/Cab with A/C |
$400 |
$1,175 |
$3,500 |
Volvo |
SD115D |
84" Drum, Cab with A/C |
$500 |
$1,500 |
$4,500 |
Caterpillar |
CS56 |
84" Drum, Cab with A/C |
$500 |
$1,500 |
$4,500 |
MAKE |
MODEL |
SPECS |
DAY |
WEEK |
4 WEEK |
|
Volvo |
SD45F* |
54" Padfoot Single Drum, Canopy |
$350 |
$975 |
$2,925 |
Volvo |
SD70* |
66" Padfoot Single Drum, Canopy/Cab with A/C |
$450 |
$1,350 |
$4,050 |
Volvo |
SD115* |
84" Padfoot Single Drum, Cab with A/C |
$550 |
$1,650 |
$4,850 |
Caterpillar |
CP56* |
84" Padfoot Single Drum, Cab with A/C |
$550 |
$1,650 |
$4,850 |
Caterpillar |
815F |
39" Padfoot Four Drum, Cab with A/C |
$1,350 |
$4,000 |
$12,000 |
Caterpillar |
825G |
50" Padfoot Four Drum, Cab with A/C |
$1,500 |
$4,500 |
$13,500 |
*Hydraulic pushblade units available.
MAKE |
MODEL |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Multi-Quip |
MVC88VTHW |
Plate Compactor |
$55 |
$200 |
$500 |
Multi-Quip |
MTX60H |
Jumping Jack |
$95 |
$275 |
$825 |
Multi-Quip |
MVH408DZ |
Reversible Plate Compactor |
$225 |
$795 |
$2,195 |
Multi-Quip |
RX157533 |
Articulating Trench Roller |
$235 |
$700 |
$2,100 |
MAKE |
MODEL |
CAPACITY |
4 WEEK |
|
Screen Machine |
Scalper 107T |
Tracked Screen (wireless remote) |
$9,000 |
*Belt damage additional.
*Screens not included.
MAKE |
MODEL |
CAPACITY |
WEEK |
4 WEEK |
|
Bell |
B25E |
19 yds. |
$2,700 |
$8,000 |
Bell |
B30E |
22.9 yds. |
$3,000 |
$9,000 |
Bell |
B40E |
30 yds. |
$4,500 |
$13,500 |
Bell |
B45E |
33 yds. |
$4,750 |
$14,500 |
Bell |
B50E |
37 yds. |
$5,000 |
$15,000 |
*Tailgate units available
MAKE |
MODEL |
SPECS |
WEEK |
4 WEEK |
|
Ford* |
F450 |
11 ft. Contractor Box |
$750 |
$2,250 |
Tandem Axle* |
|
16 yds. |
$1,925 |
$5,750 |
Tri-Axle* |
|
16 yds. |
$2,000 |
$6,000 |
*All On Road Vehicles subject to maximum monthly mileage allowance. Per mile fee maximum allowance based on vehicle type. Lessee is responsible for tire repair and routine maintenance at manufacturer's suggested intervals.
MAKE |
MODEL |
CAPACITY |
WEEK |
4 WEEK |
|
Bell |
B25E |
5,000 gal. Tandem Axle |
$3,500 |
$10,500 |
Caterpillar |
740 |
8,000 gal. Tandem Axle |
$4,500 |
$13,500 |
MAKE |
MODEL |
CAPACITY |
WEEK |
4 WEEK |
|
Freigtliner* |
M2 |
2,000 gal. Single Axle |
$1,175 |
$3,500 |
Peterbilt* |
348 |
4,000 gal. Tandem Axle |
$1,650 |
$4,950 |
Peterbilt* |
348 |
Water Cannons Available for: |
$200 |
$500 |
*All On Road Vehicles subject to maximum monthly mileage allowance. Per mile fee maximum allowance based on vehicle type. Lessee is responsible for tire repair and routine maintenance at manufacturer's suggested intervals.
MAKE |
WEEK |
4 WEEK |
|
Tandem Axle Day Cab* |
$1,500 |
$4,500 |
Tri-Axle Day Cab* |
$1,650 |
$4,950 |
*On road vehicles subject to maximum monthly mileage allowance. Per mile fee and maximum allowance based on vehicle type. Lessee is responsible for tire repair and routine maintenance at manufacturer's suggested intervals.
*All Trailers brake & tire wear to be assessed.
*All Trailers brake & tire wear to be assessed.
MAKE |
MODEL |
CAPACITY |
WEEK |
4 WEEK |
|
Morooka |
MST300VD |
5,000 lbs. |
$850 |
$2,700 |
Morooka |
MST800VD |
9,460 lbs. |
$1,850 |
$5,500 |
Morooka |
MST1500VD |
13,890 lbs. |
$2,350 |
$7,000 |
Morooka |
MST2200VD |
22,046 lbs. |
$3,000 |
$9,000 |
Morooka |
MST3000VD |
33,100 lbs. |
$4,000 |
$12,000 |
Options available for Morooka track trucks:
*360 Degree Rotating Dumpers
*Flatbeds
*Enclosed Personnel Carriers
*Mounted Air Compressor
*Mounted Welders
*Mounted Sandblasters
*Mounted Hydraulic Side Discharge Conveyors
*Mounted Vacuum
*Mounted Fuel Tankers
*Mounted Straw Blowers
*Mounted Seeders
MAKE |
MODEL |
CAPACITY |
WEEK |
4 WEEK |
|
Morooka |
MST800VD |
9,460 lbs. |
$1,850 |
$5,500 |
Morooka |
MST1500VD |
13,890 lbs. |
$2,350 |
$7,000 |
Morooka |
MST2200VD |
22,046 lbs. |
$3,000 |
$9,000 |
MAKE |
MODEL |
CAPACITY |
WEEK |
4 WEEK |
|
Morooka |
MST1500VD |
Seats 10 |
$2,850 |
$8,500 |
MAKE |
MODEL |
CAPACITY |
WEEK |
4 WEEK |
|
Morooka |
MST1500VD |
13,890 lbs. |
$3,175 |
$9,525 |
Morooka |
MST2200VD |
22,046 lbs. |
$4,025 |
$11,525 |
MAKE |
MODEL |
WEEK |
4 WEEK |
|
Morooka |
MST2200VD |
$4,350 |
$13,000 |
MAKE |
MODEL |
CAPACITY |
WEEK |
4 WEEK |
|
Morooka |
MST1500VD |
500 Gal. |
$3,675 |
$11,000 |
MAKE |
MODEL |
WEEK |
4 WEEK |
|
Morooka |
MST1500VD |
$3,500 |
$10,000 |
MAKE |
MODEL |
CAPACITY |
SPECS |
DAY |
WEEK |
4 WEEK |
|
Skytrak |
8042 |
8,000 lbs. |
42 ft. Reach |
$350 |
$900 |
$2,500 |
Skytrak |
10054 |
10,000 lbs. |
54 ft. Reach |
$450 |
$1,200 |
$3,600 |
JLG |
G12-55A |
12,000 lbs. |
55 ft. Reach |
$500 |
$1,500 |
$4,000 |
JLG |
1255 |
12,000 lbs. |
55 ft. Reach |
$500 |
$1,500 |
$4,500 |
JLG |
1644 |
16,000 lbs. |
44 ft. Reach |
$675 |
$2,000 |
$6,000 |
MAKE |
MODEL |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
JCB |
950 |
10,000 lb., 22 ft. Straight Mast |
$300 |
$900 |
$2,700 |
*On-site assembly/disassembly fees apply.
MAKE |
MODEL |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Nissan |
50 |
5,000 lb. |
$175 |
$525 |
$1,575 |
Hyster |
S155 |
14,000 lbs. |
$400 |
$1,200 |
$3,600 |
Eaves |
E-225 |
22,000 lb. |
$700 |
$2,100 |
$5,500 |
Hoist |
P360* |
36,000 lbs. |
$825 |
$2,500 |
$7,500 |
*On-site assembly/disassembly fees apply.
MAKE |
MODEL |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
JLG |
1930ES |
19' Platform Height |
$125 |
$250 |
$550 |
JLG |
2630ES |
26' Platform Height |
$150 |
$300 |
$700 |
JLG |
260MRT |
26' Platform, DSL, 4wd |
$250 |
$550 |
$1,650 |
JLG |
4394RT |
43' Platform Height, Rough Terrain |
$250 |
$550 |
$1,650 |
JLG |
340AJ |
34' Articulating w/jib, DSL, 4wd |
$250 |
$550 |
$1,650 |
JLG |
450AJ |
45' Articulating w/ jib, diesel, 4WD |
$250 |
$550 |
$1,650 |
JLG |
460SJ |
46' Telescoping w/ 6' jib, diesel, 4WD |
$250 |
$550 |
$1,650 |
JLG |
600AJ |
60' Articulating, diesel, 4WD |
$325 |
$775 |
$2,325 |
JLG |
660SJ |
66' Telescoping w/ 6' jib, diesel, 4WD |
$325 |
$775 |
$2,325 |
JLG |
660SJC |
66' Telescoping, DSL, Crawler |
$450 |
$1,200 |
$3,600 |
JLG |
800S |
80' Telescoping, diesel, 4WD |
$550 |
$1,500 |
$4,500 |
JLG |
800AJ |
80' Telescoping, Articulating, diesel, 4WD |
$550 |
$1,500 |
$4,500 |
JLG |
860SJ |
86' Telescoping w/ 6' jib, diesel, 4WD |
$550 |
$1,500 |
$4,500 |
JLG |
1350 SJP |
135' Telescoping w/ 6' jib, diesel, 4WD |
$750 |
$2,250 |
$6,500 |
JLG |
1500SJP |
150' Telescoping, diesel, 4WD |
$1,750 |
$5,000 |
$15,000 |
*SkyPower Generators and Sky Welders available on most units.
MAKE |
MODEL |
CAPACITY |
SPECS |
DAY |
WEEK |
4 WEEK |
|
Tadano |
GR300XL |
30 Ton |
101' Boom, 42' Jib |
$850 |
$2,300 |
$6,500 |
Grove |
RT540E |
40 Ton |
102' Boom, 26'-45' Jib |
$900 |
$2,500 |
$7,500 |
Tadano |
GR500XL |
50 Ton |
108' Boom, 29'-50' Jib |
$950 |
$2,850 |
$8,500 |
Grove |
RT860 |
60 Ton |
115' Boom, 60' Jib |
|
$3,300 |
$9,500 |
Terex |
RT670 |
70 Ton |
111' Boom, 32'-57' Jib |
|
$4,000 |
$12,000 |
Terex |
RT775 |
75 Ton |
126' Boom, 33' Jib |
|
$4,175 |
$12,500 |
*Unit subject to $195 cable inspection upon return.
*Customer responsible for any/all cable damage.
MAKE |
MODEL |
CAPACITY |
4 WEEK |
|
Mantis |
6010 |
30 Ton |
$9,500 |
Mantis |
9010 |
45 Ton |
$13,500 |
Mantis |
14010** |
70 Ton |
$17,500 |
Mantis |
WP750 |
Work Platform |
$1,000 |
Mantis |
18-50 Ton |
Pole Guide |
$350 |
McMillen |
8K2 |
Auger System |
$1,200 |
*Unit subject to $195 cable inspection upon return.
*Customer responsible for any/all cable damage.
**On-site assembly charges may apply.
MAKE |
MODEL |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Broderson |
IC35-2E |
4 Ton |
$325 |
$985 |
$2,950 |
Shuttlelift |
3330FL |
8.5 Ton |
$425 |
$1,275 |
$3,825 |
Shuttlelift |
5540F |
15 Ton |
$550 |
$1,650 |
$4,950 |
*Diesel & dual fuel available.
*Unit subject to cable inspection upon return.
*Customer responsible for any/all cable damage.
MAKE |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
F-750 |
17 Ton Boom |
$475 |
$1,450 |
$4,250 |
National |
20 Ton Boom |
$650 |
$1,950 |
$5,850 |
National |
23 Ton Boom |
$750 |
$2,250 |
$6,700 |
National |
28 Ton Boom |
$775 |
$2,320 |
$6,950 |
National |
30 Ton Boom |
$800 |
$2,400 |
$7,200 |
*On road vehicles subject to maximum monthly mileage allowance. Per mile fee and maximum allowance based on vehicle type. Lessee is responsible for tire repair and routine maintenance at manufacturer's suggested intervals.
*User subject to $195 cable inspection upon return.
MAKE |
MODEL |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Laymor |
8HC |
8 ft. Angle Broom |
$195 |
$540 |
$1,650 |
Broce |
KR350 |
8 ft. Angle Broom w/ Blade |
$325 |
$975 |
$2,950 |
*Bristle wear charged at $125 per inch.
*Blade wear charge additional.
*Remotes and leads available at additional cost.
MAKE |
MODEL |
SPECS |
DAY |
WEEK |
4 WEEK |
|
Vermeer |
Vactron LP573SDT |
500 gal. Debris Tank 1,000 CFM Vacuum 4,000 psi @ 4gm |
$400 |
$1,200 |
$3,600 |
Vermeer |
Vactron LP833DT |
800 gal. Debris Tank 1,000 CFM Vacuum 4,000 psi @ 4gm |
$450 |
$1,300 |
$3,900 |
MAKE |
MODEL |
DESCRIPTION |
DAY |
WEEK |
4 WEEK |
|
Wacker* |
PT3A |
3" Trash Pump, Gas |
$75 |
$200 |
$600 |
Magnum* |
MTP4000D |
4" Trash Pump, Diesel, Self Priming |
$150 |
$450 |
$1,350 |
Magnum* |
MTP6000DK |
6" Trash Pump, Diesel, Self Priming |
$200 |
$600 |
$1,800 |
Thompson* |
6TSCDJDST45T |
6" Trash Pump, Diesel, Self Priming |
$200 |
$600 |
$1,800 |
*Single shift rates.
*Double shift (8-16 hours/day) 1.5 x rate.
*Triple shift (16-24 hours/day) 2 x rate.
*P.M. service additional.
MAKE |
CAPACITY |
SPECS |
DAY |
WEEK |
4 WEEK |
|
Multiquip |
525 gal. Tank |
2" High Presure Pump, 250 ft. Head Pressure, 106 gpm, Trailer Mounted |
$100 |
$300 |
$900 |
Hotsy |
400 gal. Tank |
4,500 psi Heated Trailer Mounted Pressure Washer |
$175 |
$525 |
$1,575 |
MAKE |
MODEL |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Ingersoll Rand |
P185* |
185 cfm @ 125 psi |
$125 |
$300 |
$750 |
Ingersoll Rand |
P185 w/Blast Pot* |
185 cfm @ 125 psi |
$200 |
$525 |
$1,575 |
Ingersoll Rand |
XP375* |
375 cfm @ 125 psi |
$150 |
$450 |
$1,350 |
Ingersoll Rand |
XP825* |
825 cfm @ 125 psi |
$385 |
$1,150 |
$3,450 |
Ingersoll Rand |
HP1600* |
1600 cfm @ 150 psi |
$585 |
$1,750 |
$5,250 |
*Single shift rates.
*Double shift (8-16 hours/day) 1.5 x rate.
*Triple shift (16-24 hours/day) 2 x rate.
*P.M. service additional.
MAKE |
MODEL |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Ingersoll Rand |
MX60 |
60 lb. Breaker w/Point & Chisel |
$50 |
$150 |
$400 |
Ingersoll Rand |
MX90 |
90 lb. Breaker w/Point & Chisel |
$55 |
$165 |
$495 |
Ingersoll Rand |
JH40 |
40 lb. Rotary Hammer |
$30 |
$105 |
$275 |
Ingersoll Rand |
3A2SA |
Chipping Hammer |
$30 |
$105 |
$275 |
Ingersoll Rand |
93LA1 |
Clay Digger |
$30 |
$105 |
$275 |
|
|
Additional Points/Chisels |
$8 |
$24 |
$72 |
MAKE |
MODEL |
SPECS |
DAY |
WEEK |
4 WEEK |
|
Magnum* |
MLT6S |
6,000kW, Vertical Mast |
$125 |
$300 |
$675 |
Power-Zone Auto Start Units Available
*Single shift rates.
*Double shift (8-16 hours/day) 1.5 x rate.
*Triple shift (16-24 hours/day) 2 x rate.
*P.M. service additional.
MAKE |
MODEL |
CAPACITY |
DAY |
WEEK |
4 WEEK |
|
Wacker |
GS9.5V |
9,700kW, Single Phase, Gas |
$100 |
$265 |
$775 |
Magnum |
MMG100D |
86kW, 3 Phase, Diesel |
$225 |
$650 |
$1,950 |
Magnum |
MMG120 |
102kW, 3 Phase, Diesel |
$250 |
$750 |
$2,250 |
Magnum |
MMG150D |
127kW, 3 Phase, Diesel |
$300 |
$900 |
$2,700 |
Magnum |
MMG185 |
177kW, 3 Phase, Diesel |
$365 |
$1,085 |
$3,250 |
Magnum |
MMG235D |
204kW, 3 Phase, Diesel |
$425 |
$1,250 |
$3,750 |
Magnum |
MMG320 |
278kW, 3 Phase, Diesel |
$575 |
$1,650 |
$4,950 |
*Single shift rates.
*Double shift (8-16 hours/day) 1.5 x rate.
*Triple shift (16-24 hours/day) 2 x rate.
*P.M. service additional.
MAKE |
MODEL |
SPECS |
DAY |
WEEK |
4 WEEK |
|
MMD |
Heat Pro 700 |
700,000 BTU |
$625 |
$1,850 |
$5,500 |
Air Ducts |
|
25 ft. |
$25 |
$75 |
$225 |
|